Market and product

Pyrolysis, ozone and bacteria in tyre recycling

08:17 AM @ Tuesday - 17 November, 2026

Compiled by Bao Hien

Tyre pyrolysis plants processing tens of thousands of tonnes a year are already operating in Europe and China, returning carbon black and oil from old tyres to new tyre production. Meanwhile, research teams are testing new recycling methods that use ozone and bacteria to keep the rubber intact.

The world discards about 26 million tonnes of tyres every year. Tyres are hard to recycle because their rubber is vulcanised, meaning the polymer chains are linked together by sulphur bridges. This makes tyres durable and elastic, but it also means the rubber cannot be melted and moulded again like plastic. Besides rubber, tyres also contain steel, textile fibres, carbon black and many additives.

Today, most old tyres are shredded for use as surfacing for sports grounds, burned for heat or sent to landfill. The tyre industry is looking for ways to close the loop, that is, to return materials from old tyres to the production of new ones.

Pyrolysis at industrial scale

The approach that has reached industrial scale is pyrolysis, in which tyres are heated to high temperatures without oxygen. The process breaks tyres down into recovered carbon black, pyrolysis oil, gas and steel.

In the Netherlands, CIRCTEC opened its plant in Delfzijl on 27 January 2026. In its first phase, the plant processes 50,000 tonnes of tyres a year, and the company plans to expand this to up to 200,000 tonnes. Its outputs are recovered carbon black and circular naphtha, a feedstock for the petrochemical industry. The project’s partners are bp and carbon black producer Birla Carbon.

In China, Orion’s plant in Qingdao began commercial production on 4 June 2026. The plant makes carbon black from tyre pyrolysis oil, designed to replace two grades widely used in tyres, N326 and N330.

In Japan, Bridgestone and energy group ENEOS are building a pyrolysis demonstration plant in Seki with a capacity of about 7,500 tonnes a year, due to start operating in September 2027. The oil it produces could serve as a feedstock for butadiene, which can then be used to make new synthetic rubber.

Tyre makers are also putting circular materials into their products. Continental’s ZEvRA concept tyre contains 43% recycled materials, 13% renewable materials and 25% materials counted under the mass balance approach. Hankook aims to produce tyres with more than 85% sustainable materials and more than halve their emissions, but these are only targets so far.

The mass balance approach is an accounting method. Recycled feedstock is mixed with virgin feedstock during production, so the recycled carbon in any individual tyre cannot be physically traced.

Separating rubber with ozone

Pyrolysis breaks rubber down into oil and gas. Some teams want to keep the rubber intact so it can be devulcanised, that is, have its sulphur bridges cut so it can be reused.

The first step is to separate the rubber from the steel and fibres. Normally, tyres are shredded several times in high-power machines. Israeli start-up 3R Technology is trying a different approach. Whole tyres are placed in a dry, closed chamber at ambient temperature and pressure. Ozone-enriched gas, generated on site from air, weakens the bond between the rubber and its reinforcing materials. Mechanical separation then requires less force, less energy and fewer steps. Residual ozone is broken down into oxygen before release.

At the prototype stage, the separation station removed up to 40% of the total mass of a passenger car tyre. The company has produced samples of devulcanised rubber and incorporated the recovered material into rubber sheets in the laboratory. The next step is a pilot line, to test continuous operation, establish a full mass balance and assess how consistently it delivers clean rubber. The company has not announced when this will happen.

Green solvents and bacteria

A research team in India has tested a biological approach to devulcanisation. Ground tyre rubber was first treated with a deep eutectic solvent, formed by mixing choline chloride with urea. This type of solvent is cheap, has low toxicity and can be reused. The rubber was then incubated for 28 days with the bacterium Rhodococcus rhodochrous.

The solvent pretreatment cut some of the sulphur bridges and removed zinc additives, which can be toxic to bacteria. After the full process, the rubber’s crosslink density fell by 43.6%, and it degraded better than when treated with bacteria alone. The results were published in the journal RSC Advances on 18 May 2026.

The study is still at laboratory scale, and the 28-day treatment time is long compared with industrial production requirements. The paper did not assess the quality of the treated rubber when used in new products.